Neutral Bars

We can provide neutral/ground bars in either aluminum and copper.  These are primarily used in neutral bar assemblies and grounding applications.  Different cross sections and different screw configurations are available.  Forward us your requirements and we will come up with a solution!

PDF catalogue…



CROSS
SECTION.
UL /
CSA
WIRE
RANGE
A B C D E MATERIAL
A=ALUM.
C=COPPER
SCREW
TYPE*
5/16″ x 7/16″ CU9AL 4-14 5/16 7/16 3/16 0.312 3/16 A 1or4
5/16″ x 7/16″ CU7AL 4-14 5/16 7/16 3/16 0.312 3/16 A 2or3
5/16″ x 7/16″ CU 4-14 5/16 7/16 3/16 0.312 3/16 C 1
5/16″ x 7/16″ CU7AL 4-14 5/16 7/16 3/16 0.350 3/16 A or C 2 or 3
5/16″ x 1/2″ CU9AL 4-14 5/16 1/2 3/16 0.312 3/16 A or C 1
5/16″ x 1/2″ CU7AL 4-14 5/16 1/2 3/16 0.312 3/16 A or C 2 or 3
5/16″ x 1/2″ CU9AL 4-14 5/16 1/2 3/16 0.350 3/16 A or C 1
5/16″ x 1/2″ CU7AL 4-14 5/16 1/2 3/16 0.350 3/16 A or C 2 or 3
3/8″ x 5/8″ CU7AL 2-14 3/8 1/2 1/4 0.397 1/4 C 1
3/8″ x 5/8″ CU7AL 2-14 3/8 5/8 17/64 0.397 1/4 A 1
9/16″ x 3/4″ CU7AL 2/0-14 9/16 3/4 5/16 0.625 1/2 A or C 1
1″ x 1″ CU7AL 300 MCM-6 1 1 7/16 1.0 29/64 A or C 4

*Available Screw Types

screw types

TYPE 1 TYPE 2 TYPE 3 TYPE 4
Headless
Slotted Set Screw
Headed
Slotted Machine Screw
Headed
Slotted Robertson Combo Screw
Headless
Hex Drive Set Screw

Multiple Connectors

Used in Neutral Bar Assemblies And Grounding Applications


Ordering Request Form

To order specify the following or contact the factory: 1.888.732.2565 or email info@brumall.com.

Example:

 

*For the above product, the below example is how you would fill out a request form:

CROSS
SECTION
WIRE RANGE MAT'L
(A Or C)
SCREW TYPE # OF HOLES MOUNTING
HOLE POSITION
5/16 x 7/16 4-14 A 1 9  3, 7

Note: For mounting holes which fall outside the center lines of wire holes, consult factory.





    Please Provide The Following Information:

    Category: